For more than 25 years, students have relied on this trusted text for easy-to-read, comprehensive drafting and design instruction that complies with the latest ANSI and ASME industry standards for mechanical drafting. The Sixth Edition of ENGINEERING DRAWING AND DESIGN continues this tradition of excellence with a multitude of real, high-quality industry drawings and more than 1,000 drafting, design, and practical application problems—including many new to the current edition. The text showcases actual product designs in all phases, from concept through manufacturing, marketing, and distribution. In addition, the engineering design process now features new material related to production practices that eliminate waste in all phases, and the authors describe practices to improve process output quality by using quality management methods to identify the causes of defects, remove them, and minimize manufacturing variables. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
"Jensen, Helsel, and Short have provided students with a presentation that prepares them for drafting careers in our modern technology-intensive society throughout previous editions of Engineering Drawing and Design. The seventh edition is no exception with the focus on preparing students to enter the workplace equipped with an understanding of the latest standards, principles, and concepts necessary for a successful career in the field of drafting." -back cover.
Technology & Engineering by Delmar Cengage Learning, Inc
For more than 25 years, students have relied on Engineering Drawing and Design for its easy-to-read, comprehensive coverage of drafting and design instruction that complies with industry standards. The Fifth Edition continues its tradition of excellence with a multitude of actual quality industry drawings that demonstrate content coverage and the addition of new problems to the hundreds already on-hand for real-world, practical application. The engineering design process featured in this revision contains new material related to production practices that eliminate waste in all phases from design through manufacturing to marketing and distribution. Also described are practices that seek to improve the quality of process outputs by identifying and removing the causes of defects and minimizing manufacturing variables using quality management methods. An actual product design is taken from concept through manufacturing and to marketing. This is the most comprehensive product design analysis found in any discipline-related textbook. More than 1000 drafting and design problems are found throughout for basic to advanced challenging applications or for use individually and as team projects. New and current features of this textbook are described throughout this Preface. NEW TO THIS EDITION • Expanded history of drafting feature. • A new Standards feature box describes the specifi c standards used as related to chapter content. • New Engineering Design Applications features written by industry professionals. • Updated ASME and discipline-related standards. • Updated CADD standards. • Comprehensive coverage of ASME Y14.5-2009, Dimensioning and Tolerancing, including the most comprehensive geometric dimensioning and tolerancing content found in any textbook. • CADD fi le templates for standard ASME inch and metric drawings, and architectural and civil inch and metric drawings. • New material related to production practices that eliminate waste in all phases from design through manufacturing and to marketing and distribution. • Current practices that seek to improve the quality of process outputs by identifying and removing the causes of defects xii Copyright 2011 Cengage Learning. All Rights Reserved. May not be copied, scanned, or duplicated, in whole or in part. Due to electronic rights, some third party content may be suppressed from the eBook and/or eChapter(s). Editorial review has deemed that any suppressed content does not materially affect the overall learning experience. Cengage Learning reserves the right to remove additional content at any time if subsequent rights restrictions require it. PREFACE xiii Review Guide. Although this publication is not conclusive with respect to ADDA standards, it should be considered a key reference tool in pursuit of a professional design-drafting career. ENGINEERING DRAWING AND DESIGN CURRICULUM OPTIONS The conversational-style content is easy to read and easy to use. This textbook is comprehensive and can be used in the entire curriculum. The chapters can be used as presented or rearranged to fi t any of the following courses: • Drafting Fundamentals • Engineering Drafting • The Engineering Design Process • Engineering Graphics • Computer-Aided Design and Drafting (CADD) • Mechanical Drafting • Descriptive Geometry • Manufacturing Materials and Processes • Welding Processes and Weldment Drawings • Geometric Dimensioning and Tolerancing (GD&T) • Tool Design • Mechanisms: Linkages, Cams, Gears, and Bearings • Belt and Chain Drives • Pictorial Drawings and Technical Illustration • 3-D CAD and Modeling, Animation, and Virtual Reality • Structural Drafting • Civil Drafting • Industrial Pipe Drafting • Heating, Ventilating, and Air-Conditioning (HVAC) • Pattern Development • Precision Sheet Metal Drafting • Fluid Power • Engineering Charts and Graphs • Electrical Drafting • Electronics Drafting • Drafting Math CHAPTER FORMAT Each chapter provides realistic examples, illustrations, and related tests and problems. The examples illustrate recommended drafting and design presentation based on ASME standards and other related national standards and codes, with actual industry drawings used for reinforcement. The correlated text explains drawing techniques and provides professional tips for skill development. Step-by-step examples provide a logical approach to setting up and completing the drawing problems. Each chapter has the following special features. Engineering Design Application The Engineering Design Application leads the content of every chapter. This section gives you an early understanding of the • The most comprehensive chapter-related PowerPoint® presentation found in any textbook is now available on the Instructor CD. • Detailed course-specifi c syllabi on the Instructor CD. • Chapter-correlated ExamView tests are available for alternate testing opportunities. Engineering Drawing and Design, Fifth Edition, continues the proven success of its previous editions: • Engineering Design Applications. • CADD Applications throughout. • Hundreds of illustrative examples supporting text content. • Actual industry drawing examples to pull chapter content together. • Professional Perspectives. • Math Applications throughout and comprehensive design drafting–related math instruction on the Student CD. • Step-by-step layout methods. • Engineering layout techniques. • Practical and useful appendices. • More than 1000 real-world industry problems throughout. • Chapter tests for examination or review on the Student CD. • ASME drafting and print reading problems on the Student CD. • Comprehensive Instructor CD. Engineering Drawing and Design presents engineering drafting standards developed by the ASME and accredited by the American National Standards Institute (ANSI). This textbook also references International Organization for Standardization (ISO) engineering drafting standards and discipline-specifi c standards when appropriate, including American Welding Society (AWS) standards, the American Society for Testing Materials (ASTM), the American Institute for Steel Construction (AISC), the Construction Specifi cations Institute (CSI), and the United States National CAD Standard (NCS). Also presented, when appropriate, are standards and codes for specifi c engineering fi elds. One important foundation to engineering drawing and design, and the implementation of a common approach to graphics nationwide, is the standardization in all levels of drawing and design instruction. Chapter 1, Introduction to E ngineering Drawing and Design, provides a detailed introduction to drafting standards, and specifi c content-related standards are described throughout this textbook. When you become a professional, this text will serve as a valuable desk reference. AMERICAN DESIGN DRAFTING ASSOCIATION (ADDA)–APPROVED PUBLICATION The content of this text is considered a fundamental component of the design drafting profession by the American Design Drafting Association. This publication covers topics and related material as stated in the ADDA Curriculum Certifi cation Standards and the ADDA Certifi ed Drafter Examination Copyright 2011 Cengage Learning. All Rights Reserved. May not be copied, scanned, or duplicated, in whole or in part. Due to electronic rights, some third party content may be suppressed from the eBook and/or eChapter(s). Editorial review has deemed that any suppressed content does not materially affect the overall learning experience. Cengage Learning reserves the right to remove additional content at any time if subsequent rights restrictions require it. xiv PREFACE CADD Applications CADD Applications are provided in each chapter to illustrate how the use of CADD is streamlining the design and drafting process. Both 2-D and 3-D CADD Applications demonstrate advances made in discipline-related discussions and examples. type of engineering project that is found in the specifi c design and drafting area discussed in the chapter. T H E E N G I N E E R I N G D E S I G N A P P L I C AT I O N You should always approach an engineering drafting problem in a systematic manner. As an entry-level drafter, create sketches and written notes to plan how you propose to solve the problem. You are also often given engineering sketches and notes to interpret. Engineering sketches can be diffi cult to read. This is typical because engineers normally do not have the time or the skills to prepare a very neat and accurate sketch. Actual engineering sketches can be out of proportion and missing information. Dimensions on engineering sketches often do not comply with ASME or other related standards. Your responsibility is to convert the engineer’s communication into a formal drawing that is accurate and drawn to proper standards. Do as much work as you can based on the given sketches and related information, but ask the engineer for help if you discover issues that are diffi cult to interpret or seem to be inaccurate. Much of the work you do in engineering drafting contains geometry and related geometric characteristics. Many geometric characteristics are basic, such as drawing circles and arcs, but many can be complicated, such as compound curves. Refer to the engineer’s sketch shown in Figure 7.1 as you follow these layout steps: STEP 1 Do all preliminary layout work using construction lines on a construction layer or line type that will not display when fi nished. Begin by establishing the centers of the Ø57 and Ø25.5 circles and then draw the circles. The Ø symbol represents a circle’s diameter. STEP 2 Draw the concentric circles of Ø71.5 and Ø40. STEP 3 Locate and draw the 6X R7.5 arcs and then use tangencies to draw the R3 radii arcs with the outside arcs. STEP 4 Draw the 2X R7 arcs tangent to the large inside arcs. STEP 5 Draw the centerlines for the 6X Ø7 circles and then draw the circles from the established center points. Draw all centerlines on the appropriate layer, such as the CENTERLINE layer. STEP 6 Complete all visible object lines by trimming and extending as needed. Make sure all visible lines are on the appropriate layer, such as the OBJECT layer. Erase unwanted features. Turn off or freeze the construction layer. Figure 7.2 shows the fi nished drawing.
Technology & Engineering by Delmar Cengage Learning
Using examples and projects taken directly from our popular Engineering Drawing and Design book, this all-new video series provides viewers with 160 minutes of step-by-step demonstrations of drafting, sketching, and CAD transitioning techniques on 8 tapes. The first video in this series begins with an introduction to the design process, from steps required to produce an effective design through how design and drafting fits into the manufacturing process. Tapes 3 through 6 guide viewers to mastery of specific skills, such as: sketching, orthographic projections, dimensioning, geometric constructions, plus auxiliary views and section drawings. Given the importance of computers in today's workplace, an entire tape is devoted to making the transition from drafting board to CAD with emphasis on geometric construction drawings. The final tape offers insights into the use of tools used to move a design from the initial sketch to the manufacturing stage, including rapid prototyping, part animation, and final manufacturing of a part in the assembly. In a field that requires highly developed visualization skills, this one-of-a-kind video series will greatly reduce the learning curve. The modular video series design also ensures that the content reflects current design and manufacturing industry practices as well as the latest technological innovations, preparing the viewer for a career in today's engineering environment.
This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Facts101 is your complete guide to Engineering Drawing and Design. In this book, you will learn topics such as as those in your book plus much more. With key features such as key terms, people and places, Facts101 gives you all the information you need to prepare for your next exam. Our practice tests are specific to the textbook and we have designed tools to make the most of your limited study time.
ENGINEERING DRAWING AND DESIGN, 5E provides your students with an easy-to-read, A-to-Z coverage of drafting and design instruction that complies with the latest (ANSI & ASME) industry standards. This fifth edition continues its twenty year tradition of excellence with a multitude of actual quality industry drawings that demonstrate content and provide problems for real world, practical application. The engineering design process featured in ENGINEERING DRAWING AND DESIGN, 5E follows an actual product design from concept through manufacturing, and provides your students with a variety of design problems for challenging applications or for use as team projects. Also included in this book is coverage of Civil Drafting, 3D CADD, solid modeling, parametric applications, and more.
"This Drawing Workbook contains worksheets that present a partially worked out solution for assignments in each unit of Engineering Drawing and Design, Seventh Edition. Each worksheet has a title block and a reference number that refer to the chapter and unit number of the text. Following the table of contents are instructions that provide an overview for each assignment, and also provide references to the appropriate units." -preface.